Customize! Use the options in the blue box above to fully customize your upgrade. Click the (?) next to each item for a short description. For detailed information on each item, click the 'Customizations' tab directly above.Features
-
Fully custom build
-
Pure point to point connections. No PCB and no wiring between components
- All capacitors are manufactured by Sonicap and are matched
- Alpha Core 16ga copper foil inductors
- Mills resistors
- Your choice of full Onix IT-001 12ga OFC wire, Onix IT-001 12ga OFC wire with copper connectors or Onix IT-001 12ga OFC wire with wire nuts
- Heat Shrink tubing applied to applicable connections
- Vampire and Cardas silver solder used for all connections
- 60 durometer rubber washers are provided to keep your new crossover from vibrating against the cabinet
- SPAX serrated screws are supplied for easy installation
Install Guide Purchasing this upgrade or just want to see what the install procedure is like? Download the Install Guide here:
AV123 x-sls Ninja Master Encore Install Guide
Benefits
Overall you will notice a higher level of detail, texture, focus, superior sound stage, dynamics, musicality, and transparency. What does that mean? We use as few components in our networks as possible. This allows the cleanest signal to be passed to your speakers. Rest assured this does not change the frequency response of the speaker or the overall character.
Texture – all of the ‘inner’ details of each instrument comes across clearly. The ‘live’ feel comes across so well because the subtleties that are normally lost are finally present. The more revealing the overall presentation is, the more convincing it is.
Focus – We tightly match our components. While most components are 5 or even 10% tolerance, we use only 5% or less tolerance components and then we hand match them so that each pair of networks is 500 to 1000% better than the stock crossover.
Sound stage – moves the sound stage from being within the confines of the speaker and moves it out, up, and behind the speaker. This helps recreate the sense of space and volume of the original performance.
Dynamics – Our networks use high quality Mills resistors and Alpha-Core copper foil inductors. This means no masking of top end detail, no muddled midrange and more convincing slam on the low end. There is a lot of techno mumbo jumbo about the why’s of this and it would be too much to detail here.
Contact Us if you want more info.
Transparency – The ability for the speakers to remove themselves from the performance. Our networks enhance this ability due to their magnetically correct layout, point to point build and superior quality components.
Musicality – The best part and why we are all here. Everything your speakers used to do they will do better with Ninja Master networks and upgrades.
Components
Ninja Master networks utilize the very best components available. If you want more in-depth information on these components,
visit our components page.
Layout
The component layout of a Ninja Master network is carefully chosen to provide the shortest signal path possible while also ensuring magnetic field contamination is keep to a minimum or non-existent. For more information on why this is important, visit our
layout information page.
Additional Upgrades
We don't stop with crossover network upgrades. A speaker's final sound quality is very much a sum of its parts. The crossover network design, the crossover network parts quality, the cabinet, internal wiring, drive units and binding posts. All of these items contribute to the end product - of which the goal is to simulate a live event with perfect accuracy. Click the options info tab above for more information!
Ninja Built versus DIY
We offer kits that are professionally built by the Ninja and his minions. This way you know every connection is correct and every component is tested. These are our easiest to install kits.
You will need a Philips Head Screwdriver, 3mm or 1/8" Allen wrench and Hot glue/hot glue gun, super glue or like. You may need other tools depending on your wire connection preference.
If you are adventurous, we offer DIY (Do It Yourself) kits. These kits come with all of the parts of a professionally built kit but you assemble the network yourself. A diagram, photos and schematic are included so you don't have to figure out the layout. The ability to read a basic electronic circuit schematic is not required for a DIY build but it is very helpful!
You will need a soldering iron, heat gun or hair dryer with high setting, needle nose pliers, hot glue gun & glue or Liquid nails and wire cutters. Plus, what is listed above for the install of your built boards.
Upgrade your Cabinet
Your speaker cabinet should never 'talk' along with the music. Want to know why this happens and what you can do to stop it? Read all about the benefits of upgrading your speaker cabinet with NoRez and Black Hole 5.
Choose your Wiring Connections
We offer three different ways you can install your new crossovers depending on your skill and comfort level.
1. (Ninja recommended) Full wiring replacement with IT-001 Ninja wire. We include extra Vampire or Cardas silver solder to attach the wires to the drivers and binding posts.
2. Wires long enough to tie into the existing wires coming from the drivers and binding posts and copper connectors with color coded shrink tubing. Simply crimp the copper connectors over the wires and heat the shrink tubing for a professional finish.
3. Our easiest solution - wires long enough to reach the existing wires and includes wire nuts. Screw the wire nuts over the connections and you are done.
Skills Required
Be sure to download the install instructions on the 'description' tab. Read through to get a good idea of the install procedure. Also it lists the tools you need. This should give you a good idea of which wiring method (see the 'options info' tab) to select and if Ninja Built or DIY is more your style.
What does Ninja Master mean?
We offer several price/performance levels for our crossover upgrades. You are currently on the Ninja Master page. Learn what the difference is.
Before and After
Here we have the stock crossover network and the Ninja Master Crossover Network:
|
Coming Soon!
|
Coming Soon!
|
