 |
Sonicap Capacitors
These have become known as one of the best caps available with a sonic signature that you won't hear. They sound more like no cap than any other cap that I have ever heard. If you want to CONNECT with the music,Sonicap will lead the way. |
 |
Erse PulseX Capacitors
Erse PulseX capacitors offer excellent performance at prices not much higher than the garbage you see in most networks. Total harmonic, IMD distortion and phase distortion are virtually immeasurable, while all losses are near zero in every aspect.
|
 |
Erse Electrolytic Capacitors
A well made electrolytic capacitor. We use these only in specific areas and never in a critical path.
|
 |
Copper Foil Inductors
No dynamic compression...no more will your inductors "hum along" with the music. When a bass note goes through an Erse FoilQ inductor, you get all the power and realism of the live performance. |
 |
Erse XQ Perfect Lay Inductors
This line of coils features 1% inductive tolerance. ERSE's perfect lay coils are excellent for those who do not want any saturation distortion, but still want a low D.C. resistance. |
 |
Mills Resistors
Mills resistors offer superior sonic performance in all passive crossover circuits. Most resistors have a higher resistance to loud sounds than they do to quiet sounds. The result is an uneven mess. Bring the top to bottom presentation into sharp focus with Mills Resistors. |
 |
Lynk Resistors
Lynk resistors offer great performance for a very small price and are easily superior to the standard sand cast resistors you find in most networks. |
 |
Cardas QuadEutectic Solder
George Cardas created this ultra pure, quad eutectic solder for perfect joints; the best reliability with the lowest noise and contact resistance. Ultra pure, tin/lead/silver/copper. |
 |
Vampire Solder
High quality for great sound and reliable connections. Vampire Solder contains 4% Silver, 32% Lead, and 62% Tin. |
 |
Copper Connectors
When installing your new networks, we understand that there are situations where you just don't want (or can't)solder a wire-wire connection. We offer pure copper connectors to allow you to crimp those connections. We even throw in some color-coded pre-cut heat shrink tubing to make it professional. |
 |
Substrate
All Skiing Ninja™ Networks use point-to-point construction techniques over painted MDF. No Printed Circuit Boards. No thin traces to contaminate the signal. Just pure, crystalline music... |
 |
Spax Screws
Spax screws are specially designed to make it EASY to install your new crossover networks. Traditional wood screws only really work well if you drill a pilot hole or can apply copious pressure. Inside a speaker cabinet, neither is practical. Spax screws have patented serrations that drill their own pilot hole. Imported from Germany. |
 |
Stand-offs
The last thing you want after installing your killer new networks is a spurious vibrational sound that wasn't there before the upgrade. That's why we include specially made 60 durometer (a measure of hardness) board stand-offs. These stand-offs isolate your new network from the cabinet and keep it quiet! |
 |
Cabinet Dampening Materials
We use proprietary dampening materials developed by GR Research exclusively. NoRez and Black Hole 5 are available on speakers and subwoofers where appropriate. Click for more info on these amazing products.
|
