'Ninja
Master' Crossovers are top of the line. Our best parts; all assembled
by the head Ninja.
Features
include:
- Fully
custom build assembled by The Ninja on a painted masonite substrate
(no PCB!)
- Point
to point connections. No wiring in the signal path
- All
capacitor values are provided by Sonicap
- Where
electrolytic capacitors are needed, they are bypassed by 10-20%
of value Sonicap and a 0.1 Sonicap
- Alpha
Core 16ga copper foil inductors*
- Mills
resistors
- Full
replacement Onix IT-001 12ga OFC RED wire
- Heat
Shrink tubing applied to applicable connections
- Vampire
silver solder used for all connections
- 60
durometer rubber washers are provided to keep your new crossover
from vibrating against the cabinet
- SPAX
screws are supplied for easy installation
*
The RS760 network contains a 12mH inductor in the woofer circuit.
To make this upgrade economically viable, the 12mH inductor from
your existing networks are reused. We can install new, higher
quality Solen inductors instead of reusing the existing units however
the improvment would not be significant as the 6.5" woofers
in the RS760 are crossed over at 200Hz. Please contact
us for details on how to get your inductors to us OR to purchase
new inductors for $70. |
'Ninja
Elite' Crossovers have many of the same features as the 'Ninja Master'
crossovers but we use existing PCB and inductors. (Picture
coming soon)
Features
include:
- All
capacitor values are provided by Sonicap
- Where
electrolytic capacitors are needed, they are bypassed by 10-20%
of value Sonicap and a 0.1 Sonicap
- Mills
resistors
- Vampire
silver solder used for all connections
- SPAX
screws are supplied for easy installation
NOTE:
We will need your existing networks if purchasing a Ninja-built
upgrade. Occasionally we will have stock RS760 networks available
to keep your down time to a minimum - please contact us to confirm. |
The
DIY 'Ninja Master' Crossover component upgrade provides all the
benefits of the 'Ninja Master' Crossover but you build it yourself!
Features
include:
- Fully
custom build; painted masonite substrate
- Point
to point connections. No wiring in the signal path
- All
capacitor values are provided by Sonicap
- Where
electrolytic capacitors are needed, they are bypassed by 10-20%
of value Sonicap and a 0.1 Sonicap
- Alpha
Core 16ga copper foil inductors*
- Mills
resistors
- Full
replacement Onix IT-001 12ga OFC RED wire
- Heat
Shrink tubing applied to applicable connections
- Vampire
silver solder used for all connections
- 60
durometer rubber washers are provided to keep your new crossover
from vibrating against the cabinet
- SPAX
screws are supplied for easy installation
*
The RS760 network contains a 12mH inductor in the woofer circuit.
To make this upgrade economically viable, the 12mH inductor from
your existing networks are reused. We can install new, higher
quality Solen inductors instead of reusing the existing units however
the improvment would not be significant as the 6.5" woofers
in the RS760 are crossed over at 200Hz. Please contact
us for details on how to get your inductors to us OR to purchase
new inductors for $70.
What
is not included:
- Step
by step instruction manual (this means you need to have a general
idea of what you are doing! If you do not, go for the professionally
built Ninja version)
- Tools
required (soldering iron, wire strippers, liquid nails to secure
large inductors etc.)
|
The
DIY 'Ninja Elite' Crossover component upgrade provides all the benefits
of the 'Ninja Elite' Crossover but you build it yourself!
Features
include:
- All
capacitor values up to 30uF are provided by Sonicap
- Where
electrolytic capacitors are needed, they are bypassed by 10-20%
of value Sonicap and a 0.1 Sonicap
- Mills
resistors
- Vampire
silver solder used for all connections
- SPAX
screws are supplied for easy installation
What
is not included:
- Step
by step instruction manual (this means you need to have a general
idea of what you are doing! If you do not, go for the professionally
built Ninja version)
- Tools
required (soldering iron, wire strippers, liquid nails to secure
large inductors etc.)
|
